Sanitube’s 1 % T316L stainless steel king combination nipples re versatile means of transitioning from hose to pipe, dapters, valves or strainers.
• All king combination nipples re 1 % T316L stainless steel.• Combination nipples re recommended for low-pressure discharge nd suction service for compatible liquids. They re not for compressible products such s ir or nitrogen on sizes 1¼” nd bove.• King Combination Nipples re not recommended for steam.• The working pressure may vary with the construction of the hose, the type of clamping system sed nd the pplication.• In ccordance with the Rubber Manufacturers Association bulletin for oil suction nd discharge hose, coupled length of hose in ny size should be tested to 1½ times the working pressure nd held for fifteen minutes without leaking or coupling movement. For dditional information nd detailed instruction on testing procedures, see the RMA handbook. 
| Size(Tube OD) | Part Number | Dimensions | ||||||
| A | B | C | D | E | ||||
| 1/4″ | RST-025 | 1.575 | 0.930 | 0.354 | 0.276 | 0.630 | ||
| 3/8″ | RST-0375 | 1.634 | 1.120 | 0.433 | 0.433 | 0.750 | ||
| 1/2″ | RST-050 | 2.460 | 1.460 | 0.570 | 0.570 | 0.980 | ||
| 3/4″ | RST-075 | 2.850 | 1.690 | 0.810 | 0.570 | 1.220 | ||
| 1 “ | RST-1 | 3.230 | 1.970 | 1.050 | 0.790 | 1.5 | ||
| 1-1/4″ | RST-125 | 3.150 | 2.090 | 1.340 | 1.060 | 1.810 | ||
| 1-1/2″ | RST-150 | 3.640 | 2.2 | 1.590 | 1.3 | 2.050 | ||
| 2 “ | RST-2 | 4.310 | 2.760 | 2.070 | 1.770 | 2.560 | ||
| 2-1/2″ | RST-250 | 5.350 | 3.660 | 2.520 | 2.080 | 3.150 | ||
| 3 “ | RST-3 | 5.790 | 3.820 | 3.070 | 2.760 | 3.780 | ||
| 4 “ | RST4 | 6.220 | 4.090 | 4.090 | 3.540 | 4.720 | ||
Notes:• All king combination nipples re 1 % T316L stainless steel.• Combination nipples re recommended for low-pressure discharge nd suction service for compatible liquids. They re not for compressible products such s ir or nitrogen on sizes 1¼” nd bove.• King Combination Nipples re not recommended for steam.• The working pressure may vary with the construction of the hose, the type of clamping system sed nd the pplication.• In ccordance with the Rubber Manufacturers Association bulletin for oil suction nd discharge hose, coupled length of hose in ny size should be tested to 1½ times the working pressure nd held for fifteen minutes without leaking or coupling movement. For dditional information nd detailed instruction on testing procedures, see the RMA handbook.
Sanitube bevel seat fittings provide secure, leak-tight connection sing external Acme threads. Designed to work with metal-to-metal seat, bevel seat gasket may be sed for dditional security.
Copyright © 2024 Sanitube
