The advanced design of three piece ball valves allows for removing and servicing the center part of the valve containing the ball, stem, and seats without disconnecting the valve body from the line. Our fully encapsulated T316 stainless steel ball valves are easy to operate and can maintain and regulate high fluid pressures, volumes, and temperatures.
• Full port.
• Working Pressure: 1000 PSI WOG.
• Working Temp.: -4°F to 300°F.
• Investment casting.
• Blow-out proof stem.
• Anti-static device.
• Locking device.
• Socket weld ends conform to ANSI B16.11 & DIN 3239 Part 2.
Â
Â
| Size (NPS) | Part Number | Dimensions | |||||||||||
| d | D | L | H | W | S | T | M | N | V | P | K | ||
| 1/2″ | BV3S-050 | 0.590 | 0.870 | 2.600 | 2.240 | 4.020 | 1.500 | 0.940 | 1.310 | 0.200 | 1.190 | 0.410 | 5/16″UNC |
| 3/4″ | BV3S-075 | 0.790 | 1.090 | 3.290 | 2.600 | 4.740 | 1.690 | 1.100 | 1.480 | 0.260 | 1.440 | 0.530 | 3/8″UNC |
| 1Â Â “ | BV3S-100 | 0.980 | 1.360 | 3.740 | 2.990 | 6.240 | 2.130 | 1.380 | 1.670 | 0.310 | 1.600 | 0.610 | 7/16″UNC |
| 1-1/4″ | BV3S-125 | 1.260 | 1.690 | 4.380 | 3.190 | 6.240 | 2.560 | 1.770 | 2.000 | 0.310 | 1.650 | 0.610 | 7/16″UNC |
| 1-1/2″ | BV3S-150 | 1.500 | 1.950 | 5.120 | 3.860 | 7.400 | 2.950 | 2.170 | 2.340 | 0.350 | 1.910 | 0.690 | 1/2″UNC |
| 2Â Â “ | BV3S-200 | 1.970 | 2.420 | 5.940 | 4.170 | 7.400 | 3.460 | 2.600 | 2.890 | 0.350 | 1.940 | 0.690 | 1/2″UNC |
| 2-1/2″ | BV3S-250 | 2.560 | 2.910 | 7.200 | 5.430 | 9.650 | 4.490 | 3.390 | 3.790 | 0.470 | 2.840 | 1.300 | 3/4″UNC |
| 3Â Â “ | BV3S-300 | 3.150 | 3.540 | 8.280 | 6.060 | 9.650 | 5.200 | 3.940 | 3.190 | 0.470 | 2.580 | 1.300 | 3/4″UNC |
| 4Â Â “ | BV3S-400 | 3.940 | 4.550 | 9.230 | 7.010 | 12.600 | 6.220 | 4.920 | 4.020 | 0.630 | 3.080 | 1.540 | 1″UNC |
| Component | Description | Material | |||
| 1 | Body | T316 Stainless Steel | |||
| 2 | Cap | T316 Stainless Steel | |||
| 3 | Ball | T316 Stainless Steel | |||
| 4 | Stem | T316 Stainless Steel | |||
| 5 | Gland Nut | T304 Stainless Steel | |||
| 6 | Seat | PTFE/RTFE/CTFE | |||
| 7 | Seal | PTFE | |||
| 8 | Packing | PTFE | |||
| 9 | Thrust Washer | PTFE | |||
| 10 | Spring Washer | T304 Stainless Steel | |||
| 11 | Stem Nut | T304 Stainless Steel | |||
| 12 | Bolt | T304 Stainless Steel | |||
| 13 | Bolt Nut | T304 Stainless Steel | |||
| 14 | Spring Washer | T304 Stainless Steel | |||
| 15 | Handle | T304 Stainless Steel | |||
| 16 | Locking Device | T304 Stainless Steel | |||
| 17 | Handle Sleeve | PVC | |||
Clamp butterfly valves are suitable for clean-in-place food and beverage processing applications. Available with an EPDM or Viton® seat (refer to Sanitube’s Compound Selection Guide for compatibility information), they are suitable for low to high viscosity fluids at a wide range of operating temperatures.
Copyright © 2024 Sanitube
